2019年12月22日星期日

Odometer correction 2012 Honda CRV with Digiprog3

Topic: Odometer correction 2012 Honda CRV (has dash 93c76) with Digiprog clone.
PS: With any eeprom programmer you can make the job such as:
Option 1. Digiprog clone: Confirmed
Option 2. upa programmer: Confirmed (costs less than 100 EUR, easy job)

How to do 2012 Honda CRV Odometer correction with Digiprog clone:
This car is edited by eeprom, not obd2. You always have to try to remove eeprom from dash for a better reading, use EEPROM MODE in Digiprog, select 93c76 x 16 bits and read it, verify it, and save the original file read, then post your file here with exact original mileage and mileage you need and I will edit for you.
[caption id="attachment_3847" align="aligncenter" width="1000"]Eeprom 01 Eeprom 01[/caption]

Test signal continuity between bdm ponits marked in the picture and the legs eeprom
Use pin 1,2,3,4,5 and 8 only from eeprom
[caption id="attachment_3848" align="aligncenter" width="1000"]Eeprom 02 Eeprom 02[/caption]

Use thin wires to join the colors from adapter to eeprom legs.
[caption id="attachment_3849" align="aligncenter" width="1000"]Eeprom 03 Eeprom 03[/caption]

Open your db25 adapter and check it
connect like this picture
[caption id="attachment_3850" align="aligncenter" width="324"]Wiring Diagram 04 Wiring Diagram 04[/caption]
In general, Digiprog clone is a good tool if you know how to use it well.... I think principal problem is you dont have any experience in this job and you need a good supporter who can teach you this job.
http://www.obdexpress.co.uk

Source:http://www.mileageprogrammer.com/2012-honda-crv-odometer-correction-with-digiprog-clone/

没有评论:

发表评论

Digimaster 3 vs. ODO Master vs.OBDSTAR X300M vs. Digiprog III,

We have picked out 4 best mileage programmers from   OBDexpress.co.uk   in this year : Yanhua Digimaster 3, OBDSTAR ODO Master, OBDSTAR X300...