PS: With any eeprom programmer you can make the job such as:
Option 1. Digiprog clone: Confirmed
Option 2. upa programmer: Confirmed (costs less than 100 EUR, easy job)
How to do 2012 Honda CRV Odometer correction with Digiprog clone:
This car is edited by eeprom, not obd2. You always have to try to remove eeprom from dash for a better reading, use EEPROM MODE in Digiprog, select 93c76 x 16 bits and read it, verify it, and save the original file read, then post your file here with exact original mileage and mileage you need and I will edit for you.
[caption id="attachment_3847" align="aligncenter" width="1000"]
Eeprom 01[/caption]Test signal continuity between bdm ponits marked in the picture and the legs eeprom
Use pin 1,2,3,4,5 and 8 only from eeprom
[caption id="attachment_3848" align="aligncenter" width="1000"]
Eeprom 02[/caption]Use thin wires to join the colors from adapter to eeprom legs.
[caption id="attachment_3849" align="aligncenter" width="1000"]
Eeprom 03[/caption]Open your db25 adapter and check it
connect like this picture
[caption id="attachment_3850" align="aligncenter" width="324"]
Wiring Diagram 04[/caption]In general, Digiprog clone is a good tool if you know how to use it well.... I think principal problem is you dont have any experience in this job and you need a good supporter who can teach you this job.
http://www.obdexpress.co.uk
Source:http://www.mileageprogrammer.com/2012-honda-crv-odometer-correction-with-digiprog-clone/
