The solution of Digimaster 3 Insufficient Memory or File Copy Error

If your Yanhua Digimaster 3 meet error like this  below:

a

Error:

Cannot copy “LCB_ALFA_147.htm”. There is not enough free disk space.

 

Solution:

1. Turn off DigimasterIII and turn on again, when you enter Digimaster 3 system, there will be a notice asking to download a management program or black screen. Please ignore and press “keyboard” + “E” to enter the resource manager.

2. Find the “NandFlash” icon, double click “NandFlash”, delete the “YHTech” file folder. If the file folder cannot be deleted, please restart and try again.

3. After you delete the file, copy the necessary “YHTech” file folder and “NK_D3.ROM” file to SD card.

4. Press “1” + “Keyboard” and turn on the power switch, start to refresh the inner core.

5. When the inner core refresh is finished, and the Digimaster III start icon can be seen, press the “F1” and “5” button in turn immediately, copy files from the SD card to FLASH.

6. When copy finished, you’ll be able to turn it on successfully.

Source:http://www.mileageprogrammer.com/digimaster-3-insufficient-memory-or-file-copy-error/

Which mileage Programmer to invest during covid19?

Out of job due to covid19 issues and trying to find your way in to millage correction etc is a good idea. Then which mileage correction tool to start with?

 

Please read these reviews:

- Buy from start Upa and Fvdi. It's cheap and cover a lot of cars.

 

- Buy Obdstar X300M , OBDSTAR ODO master  and Digiprog3 and you will cover a lot of cars

 

- Dashcoder is one of the best options but you should specify your budget. What cars do you expect to be working on? Upa is also very useful.

 

- You can do mqb dash vw and audi with X300M or OBDSTAR ODOMASTER   .

 

-  For good beginning u need digiprog 3.

 

- Best tool to start with is Obdstar X300 Dp Pad 2 package C and Iprog+. Those two will cover 50-60% of the cars on the market.

 

- You will need an eeprom programmer, pdf manuals, mileage calculator software and Brain.exe.

I do a better job with 300 usd.

 

- I have over $30,000 invested and can do most US/Japanese euro is another story as is yearly updates expect to pay $5000-$10,000 a year updates.

Main tools are Smelecom DSP3, Diag Prog 4, Jprog, Enigma all of which with an up to date full OBD & EEprom package will run $6500-$13,000 each.

Don't forget a good scanner Autel 906 or better will do and a laptop with windows 7.

 

Source:http://www.mileageprogrammer.com/which-millage-correction-tool-to-invest-during-covid19/