1)You'll need a tool like Digiprog 3 or something to do dashes
2)You'll need something to do cas units, depending if you want to do obd2 or remove them
3)You'll need cleaner software that can clean every ECU out of ANY model BMW, all 12-15 ecu's per car and every km record, even DME/DDE
The one thing that I have only seen on 1 tool is the removal of all 4 cas3/3+ history KM's, thats right its not just 1 KM that needs to be changed with all these hi end tools as well, there are aside from the main one inside eeprom, which syncs with dash and keys, there are 3 HISTORY KM's that the unit stores as well.
Digimaster 3 for odo and R280, R270 for cas, newer models (Fxx) need canfilter!
FVDI clone not good!
ALL MODULES CAN BE DONE, and OVER OBD2 very easily in fact. That’s number 1, number 2 Fxx do not need canfilters, if you need to repair the km if there too far to use a speedfilter to stop km you can do like me, change our cas4 unit completely with one that is ordered for the car's vin, do the dash and they will sync. Then use sw to do all the other ecus
Digimaster 3 is the best mileage correction tool for BMW CAS 2000-2017.
Share a 2000-2016 BMW CAS models list on mileage correction and key programming, follow the list, you can check the corresponding CAS modules.
| Digimaster3 BMW Car List (2000-2017 ) | ||||||
| BMW Car Model | CAS1 912DG128 (3K91D) | CAS2 9S12DG256 (2K79X) | CAS3 9S12DG256 (0L01Y) | CAS3+ 9S12XDP512 (0L15Y) | CAS4 9S12XDP512 (1L15Y) 9S12XEP100 (5M48H) | FEM |
| BMW 1 Series | 2004-2006 (E87) | 2007(E87) | 2008-2011 (E87) | 2012-2014 (F20) | ||
| BMW 3 Series | 2005-2006 (E90) | 2007(E90) | 2008-2012 (E90) | 2013-2014 （F30/F35） | ||
| BMW 5 Series | 2004-2006 (E60) | 2007(E60) | 2008-2010 (E60) | 2010-2014 （F07/F10/F11/F18） | Not available yet | |
| BMW 6 Series | 2004-2007 (E63/E64) | 2008(E63/E64) | 2009-2010 (E63/E64) | 2011-2013 (F12/F13) | Not available yet | |
| BMW 7 Series | 2001-2004 (E65) | 2004-2008 (E66) | 2009-2013 (F01/F02) | Not available yet | ||
| BMW X1 Series | 2010-2014 (E84) | Not available yet | ||||
| BMW X3 Series | 2011-2013 (F25） | Not available yet | ||||
| BMW X5 Series | 2007(E70) | 2008-2013 (E70) | 2014（F15） | |||
| BMW X6 Series | 2008-2014 (E71) | Not available yet | Not available yet | |||
| BMW Z4 Series | 2010-2013 (E89) | Not available yet | Not available yet | |||
Digiprog 3 vs. Digimaster 3
Both Digi3 and Digimaster should do the job. Digi3 is cheap and good, Digimaster is more like a professional tool, and of course costs much more.
bmw f30 mileage correction:
Credit: http://mhhauto.com/Thread-Odometer-in-BMW-F30-with-FEM
R270+ programmer should be able to do the dash on f30
in dash you have QD160. and if you put filter in FEM tell you customer
that when he go with car to dealer and they read out the mileage from the key
that they will read the Original mileage still. and if the car has tele option then they can see
on computer the Original mileage in house.
To do the key...
If he got new fem from dealer coded to car it comes with 0km, if he makes dash xxxxx fem will take km from dash. Once both are synced with same km, he takes each key 1x1 and drives 15-20km and key will take new mileage. After that using bmw explorer or bmw cleaner he should clean all the other ecus to 0. If hes smart he'll put in a speed filter after this if the car is going to stay on the road
Src:http://www.mileageprogrammer.com/bmw-odometer-correction-tool-buying-guide/
没有评论:
发表评论