Digiprog 3 Smart ForTwo 2007 (BOX/TACHO) Odometer Correction Test

Digiprog 3 and Smart ForTwo 2007 BOX and TACHO. Possible?

Yes. Here you go.

Part 1: Smart ForTwo 2007 BOX

Part 2: Smart ForTwo 2007 TACHO

Part 1: Smart ForTwo 2007 BOX

Requires plug 48:

ST 48

yellow 18 yellow

green 17 green

white 7 white

brown 13 brown

SMART Model 2007 BOX

!!! ALWAYS FOLLOW THE BATTERY !!!

Remove box and disassemble. 

Position of the box: driver footwell left above the steering column. 

Connect the plug 48 with the marked solder points

Attention the big fuses have to be pulled to open the box; Remember slots.

Select the program: car / truck - SMART - FORTWO - BOX.

  

The DIGIPROG 3 indicates the old / wrong KM level.

Program the new / correct KM booth and you're done.

The speedometer must gem. 

Part 2: Smart ForTwo 2007 TACHO

Requires plug 01:

ST 1 clip 3M 923650-08

1 1

2 2

3 3

4 4

19 5

6 6

5 7

7 8

SMART FORTWO 95C640

!!! ALWAYS FOLLOW THE BATTERY !!!

Remove and disassemble the speedometer.

  

Carefully peel off the pointer. 

Locate the chip 95C640

The designation can also be 25LC640.

 ATTENTION: you have to unsolder this chip. 

First, always make a backup of the chip via the EEPROMM program.

Select the program: CAR / TRUCK - SMART FORTWO - CHIP 95C640.

The DIGI PROG displays the old / wrong KM level.

Program the new / correct KM booth and you're done.

The box must gem.

Tech support from http://blog.obdexpress.co.uk/2018/05/22/digiprog-3-smart-fortwo-2007-box-tacho/