Audi A3 Reset mileagea using Digiprog III

Good to know!!! Digiprog 3 V4.94 can program Audi A3 A4 A6 A8 dash mileage .

i.e: Audi A3

The first, connect your car and dp3 mileage correction tool

Current mileage:251007

 

-->CAR/TRUCK-->AUDI-->A3-->8L 1996-2003-->VDO DIAG 2000-

Press "√" to continue

Input the new KM what you want, then Press "√" ,Digiprog 3 will automatically rewrite the mileage to your car dash

 

Here, we input new km: 211000

Works have done!Check written value

New the mileage is 211007, Digiprog 3  mileage programmer change AUDI A3 kilometrage succeed!

Digiprog III for AUDI vehicle list for you check:

Manufacturer	Model	DigiProg
Audi	A2/3/4/6 VDO To 2011	Diagnostic OBD
Audi	A2/3/4/6 VDO To 2011	Diagnostic OBD
Audi	A3 A8 2003 on Service & Navigation	Diagnostic OBD
Audi	A4 2001-2005 RB4 Encryption	Diagnostic OBD
Audi	A4 Bosch All Models	Diagnostic OBD
Audi	A8 All models	Diagnostic OBD
Audi	A8 to 2011	Diagnostic OBD
Audi	Audi A2/A3/A5/ A6/A7/ A8 /R8/ Up To 2011	Diagnostic OBD
Audi	Jaeger/Magneti Marelli up 04/99	Diagnostic OBD
Audi	MM 4/99	Diagnostic OBD
Audi	Q7	Diagnostic OBD
Audi	TT Up to 2011	Diagnostic OBD

 

Source:http://www.mileageprogrammer.com/

Digiprog 3 Reset mileage For OPEL Corsa

It's confirmed that Digiprog III odometer correction supports OPEL Corsa to reset mileage via OBDII port. Here you are:

Current mileage:200001

 

-->CAR/TRUCK-->OPEL/VAUXHALL-->CORSA-->DAIG

 

   

Press "√" to continue

Then input the new mileage, here we input a crazy number "208780"

LOL, if your company pays you the fuel per trip without GPS, you are making a .....hahaha, joking, But this is an illegal operation, don't do it.

CHECK WRITTEN VALUE

New mileage in the dashboard shows: 208769 km

Done! Digiprog 3 mileage programmer works on Opel Corsa perfectly!

Kindly note: you must press the trip reset before you write the new mileage then release the trip reset when digiprog says check new value and disconnect battery terminals for 10 seconds.. job done

Digiprog 3 functions list for Opel/Vauxhall

Agila nec78

Antara c86

Astra

Daig

C56

Trw 24xx

35080

Diag 2009-

Bsi 25160

Bsi 24c16

Ecu bosch 95160

Ecu bosch 95640

Ecu mjd 95320

Corsa

Diag

35080

Frontera delco 93cs46

GT BOX s95080

Insignia

Diag

Bsi 24c16

Bsi 25160

Meriva

Diag

Ecu mjd 95320

Mokka

Diag

Bsi 24c16

Bsi 25160

Monaro 24c02

Monterey c46

Movano

C76

C56

Nec78

Signum

Cs66

Ecu 95160

Speedster

24c04

Hc11

Tigra diag

Vectra

Vdo chip 93cs46

Diag -3/99

Diag 3/99-

Cs66

Ecu 95160

Vivaro

95020

C66

C76

Zafira

Diag 2011-

Diag

Trw chip  24c02

35080

Ecu 95160

Ecu 95640

4 Steps! Digiprog 3 Chang KM for VW golf 5 2004 via OBD

Q:Possible to change odometer for VW golf 5 2004 with Digiprog 3 V4.94 via OBD?
A:YES!
Step-by-step here: 

• Connect Digiprog 3 to the car via OBD,power on the device,we can see the current mileage is  136023km

  

  
  

• Select a car: PKW/LKW->VW->Golf->Golf5->Tacho,the Press "√"to continue

• DP3 takes 30 seconds to read the mileage, then enter a new mileage to change,here we input the new mileage is: 131231km

• Digiprog 3 china clone is confirmed to OBD change km for Golf5!Works perfect!

Source:https://www.obdexpress.co.uk/service/digiprog3-golf5-obd-odometer-mileage.html

Digiprig 3 Odometer Correction SEAT

Confirmed! Digiprog 3 can change mileage on SEAT ALHAMBRA via OBD2 port.
Step-by-step here:
After connect digiprog  iii odometer correction tool and vehicle, pls power on them.
Go to the main menu,press"CAR/TRUCH"

Check our current mileage :109835

Then, select our vehicle model,in this case:press "SEAT"->"ALHAMBRA"->"-7/2000 DIAG"


Confirm the information, press "√" to continue.

Now, input the new KM as you like, here, we input 47200, then ,press  "√" to continue.

Test ...
Connection...
It only takes a minute, Job done!

We check the new KM is 471886, Within the error range, no need to worry.

Digiprog 3 V4.94 changes  SEAT ALHAMBRA mileage by obd2 from original mileage 109636KM  to 472000KM.it’s successful.

Source:http://www.mileageprogrammer.com/digiprig-3-odometer-correction-on-seat/

The solution of Digimaster 3 Insufficient Memory or File Copy Error

If your Yanhua Digimaster 3 meet error like this  below:

a

Error:

Cannot copy “LCB_ALFA_147.htm”. There is not enough free disk space.

 

Solution:

1. Turn off DigimasterIII and turn on again, when you enter Digimaster 3 system, there will be a notice asking to download a management program or black screen. Please ignore and press “keyboard” + “E” to enter the resource manager.

2. Find the “NandFlash” icon, double click “NandFlash”, delete the “YHTech” file folder. If the file folder cannot be deleted, please restart and try again.

3. After you delete the file, copy the necessary “YHTech” file folder and “NK_D3.ROM” file to SD card.

4. Press “1” + “Keyboard” and turn on the power switch, start to refresh the inner core.

5. When the inner core refresh is finished, and the Digimaster III start icon can be seen, press the “F1” and “5” button in turn immediately, copy files from the SD card to FLASH.

6. When copy finished, you’ll be able to turn it on successfully.

Source:http://www.mileageprogrammer.com/digimaster-3-insufficient-memory-or-file-copy-error/

Which mileage Programmer to invest during covid19?

Out of job due to covid19 issues and trying to find your way in to millage correction etc is a good idea. Then which mileage correction tool to start with?

 

Please read these reviews:

- Buy from start Upa and Fvdi. It's cheap and cover a lot of cars.

 

- Buy Obdstar X300M , OBDSTAR ODO master  and Digiprog3 and you will cover a lot of cars

 

- Dashcoder is one of the best options but you should specify your budget. What cars do you expect to be working on? Upa is also very useful.

 

- You can do mqb dash vw and audi with X300M or OBDSTAR ODOMASTER   .

 

-  For good beginning u need digiprog 3.

 

- Best tool to start with is Obdstar X300 Dp Pad 2 package C and Iprog+. Those two will cover 50-60% of the cars on the market.

 

- You will need an eeprom programmer, pdf manuals, mileage calculator software and Brain.exe.

I do a better job with 300 usd.

 

- I have over $30,000 invested and can do most US/Japanese euro is another story as is yearly updates expect to pay $5000-$10,000 a year updates.

Main tools are Smelecom DSP3, Diag Prog 4, Jprog, Enigma all of which with an up to date full OBD & EEprom package will run $6500-$13,000 each.

Don't forget a good scanner Autel 906 or better will do and a laptop with windows 7.

 

Source:http://www.mileageprogrammer.com/which-millage-correction-tool-to-invest-during-covid19/

 

 

Which odometer correction tool works for OPEL Astra?

Q:Possible to change odometer mileage for OPEL Astra H 35080 with Digiprog 3 china clone?
A:Yes, it should work. 
OBDexpress.co.uk offers you the step-by-step guide of  How to use Digiprog 3 clone for OPEL Astra H 35080 odometer correction.

• 1.First, it requires plug 01 to connect the car dashboard and Digiprog III,then the machine power on.

• 2.Select a car: OPEL/VAUXHALL-ASTRA-35080

DP3 is reading the current mileage

• 3.DP3 reads the current kilometers:182672 KM

• 4.Enter a new mileage to change,new mileage: 181423KM

The mileage on the dash is changed from 182672 KM to 181408 KM!
Digiprog 3 china clone is confirmed to change km for Astra 35080 (with plug 01)
Works perfectly!
Digiprog 3 mileage correction for Opel/Vauxhall list:
Agila nec78
Antara c86
Astra
Daig
C56
Trw 24xx
35080
Diag 2009- Bsi 25160
Bsi 24c16
Ecu bosch 95160
Ecu bosch 95640
Ecu mjd 95320

and:

Insignia new version

Astra new version

Source:http://www.mileageprogrammer.com/digiprog-3-clone-opel-astra-35080-odometer-correction/