YH Digimaster III Nissan pathfinder mileage adjustment

 

 Yanhua Digimaster 3   is able to  adjust Nissan pathfinder mileage, here is the operate guide for you

 

Look at the images of Nissan pathfinder option:

Select "Meter system" then "Japan & Korea".

 

Select "Nissan".

 

Select "Pathfinder".

 

Have option: 2000, 2005-2008, 93C56, 2004, 93C46 etc.

Please firstly find out your dashboard chip type and the enter the above selection relatively.

 

For how to do next, Digimaster 3 machine will display the instruction.

 

Enjoy!


http://www.mileageprogrammer.com/

How to fix Digiprog iii on toyota MR2 MK3 "chip not found"

Topic:  Digiprog III  problem on a Toyota mr2 mk3 "chip not found"

Question 1: When I try to connect my c46 plug which the Digiprog 3  says I'm supposed to use to adjust the milage (the old one broke and I got a new one that has a lot higher mileage than the original odometer), I get the message "chip not found" error...does anybody know why?

Answer:

Two things:-

1. make sure you are putting your c46 cable on the right chip (93C46).
2. Make sure you're putting the cable on the right way round, the chip normally has a marking where PIN 1 is located, this should be connected to the cable with PIN 1 touching the PIN with the red wire on your cable.

Question 2: 

Tried to connect it the two ways it can be connected.. still nothing, this is btw the cable I got told to use.

 

Answer:
Short the cristol and try it.

Result: 

It works now, i started looking more carefully on the adapter itself.. which had plastic residue on the clip so it wouldn`t grip the chip enough to make full contact!

Credit to nemesis988 and Fraz from cartechnology.co.uk, thanks!

Relate post:

Using Digiprog 3 V4.94 to program EEPROM Guide